Descargar Imprimir esta página

RectorSeal EZ TRAP EZT-210 Instrucciones De Instalación

Publicidad

Enlaces rápidos

U.S. PATENT NUMBERS 5,069,042 5,522,229
Model EZT-210
3 ⁄4 CONDENSATE TRAP
OVERFLOW SWITCH
CONTENTS
1 - 3/4 Standard EZ-Trap
1 - 1 Cross
2 - 1
3/4 Bushing
1 - 1 Red Cap
1 - 3/4 Tee
1 - Black Stub
The manufacturer disclaims all implied and express warranties, including the implied
warranty of merchantability and the implied warranty of fitness for a particular
purpose, except as follows:
The EZ-Trap condensate trap or overflow switch purchased by you is unconditionally
warranteed to be free from defects in material and workmanship under normal use for
a period of three (3) years from date of purchase, providing it is installed and operated
strictly in accordance with manufacturer's installation instructions.
If the product is found to be defective or otherwise fails in normal use, you may return
it for replacement. All freight charges for the return of the product shall be borne by
you. The manufacturer will pay outgoing freight charges for the replacement product.
Defective products returned to EZ Trap prepaid will be repaired or replaced free of
charge. Replacement product will, to the extent such product is then available in
manufacturer's inventory, be of similar type, color and kind. Manufacturer retains the
right to substitute product if replacement product does not conform in terms of color,
type and specifications to the original product, if no longer available.
This warranty does not cover replacement labor or any cost, claim or incident to any
defect nor does it cover any consequential damages. The sole liability of the
manufacturer under this warranty is limited to the replacement of defective product.
Product damaged by improper use, accident, neglect, alteration, abuse or improper
installation is excluded from this warranty.
EZ TRAP INC.
3 Kellogg Court, Unit 10 Edison, NJ 08817
phone: 732-248-8066 fax: 732-248-8068
e-mail: info@eztrap.com web: www.eztrap.com
210 INSTALL 3/04
7
62233 00206
EZT-210
®
1 - Float Switch Assembly
1 - Terminal Cover
1 - 48 Cable
1 - 3/4 Male Adaptor
1 - Cleaning Brush
1 - Red/Blue Label
1 - Yellow Cleaning Label
EZ TRAP WARRANTY
9
THE TRAP
EXPERTS
WITH
©2004
EZT-210

Publicidad

loading

Resumen de contenidos para RectorSeal EZ TRAP EZT-210

  • Página 1 62233 00206 EZT-210 THE TRAP EXPERTS U.S. PATENT NUMBERS 5,069,042 5,522,229 Model EZT-210 3 ⁄4 CONDENSATE TRAP WITH OVERFLOW SWITCH CONTENTS ® 1 - 3/4 Standard EZ-Trap 1 - Float Switch Assembly 1 - 1 Cross 1 - Terminal Cover 2 - 1 3/4 Bushing 1 - 48 Cable...
  • Página 2 EZT-210 Model 62233 00206 INSTALLATION INSTRUCTIONS/ INSTRUCCIONES DE INSTALACIÓN EZT-210 1. Screw adaptor into drain outlet on primary drain pan. Cut PVC stub to length & glue into adaptor (Figure 1). 2. Glue both 1″-3/4″ adaptors into Cross (Figure 2). 3.