AQUA FORTE Dosatech Manual De Instrucciones página 7

IMPORTANT INFO
First step before switching on the Dosatech (drawing 1)
When the pump cup has been stationary for an extended period of time, it may become stuck. You will then
hear a clicking sound. This can be prevented (only before switching on) by activating the silicone grease by
pulling the hose back and forth two times.
This device is only capable of metering; it is not capable of measuring parameter values.
Metering pump
• Ensure that the hoses of the metering pumps are filled with liquid and contain no air.
• 1 sec = 0.5 cc based on a viscosity (fluid thickness) equal to that of water.
• Max. metering time: 600 sec. per metering event.
MAINTENANCE
Clean device with a well-wrung damp cloth.
SETTINGS
A Setting clock after initial activation. 24-hour clock.
B
Correcting the current time.
C
Metering settings. Here you can set
the desired metering times.
D Activating continuous metering.
E Deactivating continuous metering.
F
Navigating through the set metering times.
A
First use, new device
Confirm
1325
scroll and adjust
hold 3 sec.
for time set
Set minutes
AQUAFORTE DOSATECH MANUAL • 7
scroll and adjust
push to confirm
hold 3 sec. for dosing time set
Set hours
Confirm