Installation; Tools Required; Injector Nozzles - Miele A 312 Instrucciones De Manejo

en - Installation
28

Tools required:

- 9 mm Spanner (WAF 9)
- 13 mm spanner (WAF 13)

Injector nozzles

The nozzles of the A 312 module consist of a Y-piece with 2 irrigation
connections. The supplied nozzles must be attached to the branches
of the Y-piece.
Screw the injector nozzle with the plastic support onto the longer

branch of the Y-piece.
Screw the nozzle with the plastic hose into the shorter branch of the

Y-piece.
Use a spanner to tighten both nozzles.

Screw the Y-piece into one of the module's holders and use a span-

ner to tighten this too.
Repeat the process until nozzles have been attached to all of the

module's threaded holders.