Insignia NS-GSC101 Manual De Instrucciones

STOP
READ THIS FIRST
ATTACHING THE SLIM FIT CASE:
1 Slide the 3DS XL® system bottom first into the BOTTOM piece of the Slim Fit Case
and then snap the case onto the 3DS® XL system.
2 Slide the front of the TOP piece of the Slim Fit Case onto the top of the 3DS XL®
system and then snap the case onto the 3DS XL® system.
The charging cradle cannot be used to charge the Nintendo 3DS XL with the product
attached. Please charge by plugging the DC plug of the AC adapter to the AC
adapter connector of the Nintendo 3DS XL. Also, when charging the Nintendo 3DS
XL with the DC plug of the AC adapter plugged into the AC adapter connector,
please do not open the Nintendo 3DS XL to a full 180° as it may damage the system.
REMOVING THE SLIM FIT CASE:
CAUTION: Failure to follow these instructions could damage your 3DS XL system.
1 Firmly hold the 3DS XL system and pull the tab locks off.
Tab locks
2 Slide the case off the system as shown.
3 Continue to firmly hold the 3DS XL® system and locate the tab locks on the TOP
piece of the Slim Fit Case. Release the Tab Locks and remove the TOP piece of the
Slim Fit Case as shown.
Tab locks
3D
FIT
ld damage your 3D mage yo
ocks off ff.
OFF
V1 ENGLISH/SPANISH 14-0074