UK
Important Safety Instructions
1. Please read the instructions carefully and keep it in your records.
2. It is the user's responsibility to operate this appliance in accordance with the
instructions given.
3. Contact your dealer immediately in case of any malfunctions.
4. Keep the cooler away from strongly heat-emitting sources i.e. oven, cooker and +
5. Do not expose it to direct sunlight.
6. Place the cooler in a dry place.
7. Plug the mains cable into a socket with a supply voltage as indicated on the rating
label.
8. Always keep in mind that all electrical devices are sources of potential danger.
9. Do not use inflammable material such as thinner, gasoline etc. Only use materials
which have no odour and no poisonous effect.
10. This appliance must be earthed. The main electrical connections must be done by
skilled electricians.
11. Start your cooler one hour after installation and cleaning.
12. We declare that no asbestos nor any CFC are used in the construction.
13. The oil in the compressor does not contain PCB.
If the cooler is not used any longer, remove the door before scrapping in order to
prevent children entering the cabinet and thereby risking danger to their life.
Installation
The cooler is supplied with a wooden pallet for safe transportation. Remove the pallet and
place the cabinet in upright position and level it by means of the adjustable screws at the
base. Check with a spirit level.
Place the cabinet as described in the safety instructions.
When the cabinet is placed on carpet or on a wooden floor it may require re-adjustment.
If you want to install your cooler into a gap between walls, take care of the following: