DigiPower Re-fuel RF-6H34 Manual Del Usuario página 3

ENGLISH
CHARGING THE ACTION PACK
Connect the micro USB cable from the ACTION PACK to the
USB wall charger. The LEDs (located on the back of the
case) will turn on to indicate the pack is being charged.
CHARGING STATUS INDICATOR
STATUS DISPLAY STATE
One LED is blinking
One LED is on, next LED is blinking
Two LEDs are on, last LED is blinking
All three LEDs are on
ACTION PACK is fully charged.
To check the charge level shake pack once.
CHARGE STATUS
Below 20%
20% - 60%
60% - 95 %
95%-100%
3