Installation; Placement Of The Machine; Electric Connection - arilex 1DUO Manual De Instrucciones

3.- INSTALLATION

3.1.- PLACEMENT OF THE MACHINE

• Before proceeding to its use, protective plastics should be removed
from stainless steel.
• Position the appliance on a sufficiently wide and stable support surface.
• Do not place any obstacle (wall, machine, etc.) near the appliance.
It is advisable to install the appliance under an extraction hood that sucks the
vapors produced by cooking.
In the case that the appliance should be installed near walls, partitions,
kitchen furniture, etc., it is recommended that they be made of non-flammable
material, otherwise they should be covered with non-flammable thermal
insulation material.

3.2.- ELECTRIC CONNECTION

The appliance is provided with an electric cable that must be connected
to a general switch equipped with a thermal magnet that protects the user
from possible accidental contacts or due to alterations of the machine.
It is mandatory to make a good grounding connection according to
regulations.
(This connection must be made by specialized personnel).
THE MANUFACTURER IS NOT RESPONSIBLE FOR POSSIBLE DIRECT
OR INDIRECT DAMAGES CAUSED BY THE NONCOMPLIANCE OF
THE REGULATIONS.
ALL OBSERVATIONS OF THE PROVISIONS FOR THE PREVENTION
OF FIRE MUST BE RESPECTED.
The manufacturer does not assume any commitment of guarantee
for damages that are verified due to the non-observance of the
instructions for the installation and for the use or in case of improper
use. The manufacturer does not assume any warranty commitment for
a connection that has not been made in accordance with the regulations
in force.
10