Design Nanoleaf Shapes Guia De Inicio Rapido página 10

REQUIRES A NANOLEAF® SHAPES SMARTER KIT/STARTER KIT
EN
WARNINGS & CAUTIONS Please read this safety information carefully and keep this document for future reference. Help articles and
customer support is always available at https://helpdesk.nanoleaf.me. This Nanoleaf® product is not designed, certified, nor intended for
use in: Enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees
Celsius. Emergency exits, emergency lighting, or other use cases involving critical systems for human safety. In conjunction with 3rd party
devices that are not approved by Nanoleaf® for use with Nanoleaf® products. Locations or use cases where there is a risk of electric shock.
Outdoor areas, regardless of weather conditions. Wet or damp conditions. As a floor covering or floor tiling. Excessively hot environments
that are consistently above 40 degrees Celsius for extended periods of time (for example: near ovens, space heaters, clothing dryers).
Regions or countries other than that in which the product was intended for and certified for sale in. Use in excessively humid areas. When
using this Nanoleaf® product: Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use.
While connected to the electrical supply of the building, do not place any metallic or conductive objects near any exposed metal contacts
on any component. Do not allow small children to operate this device without adult supervision. This device contains small parts that may
be a choking hazard to small children. Loose or dangling cords may cause an entanglement hazard to small children. Do not leave cords
dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it is connected to
power. Clean the panels with a soft dry cloth, and do not use harsh cleaning agents. Do not bend or flex the panels with the connector still
attached, as this will cause breakage. Do not attach the panels together with any connector or device other than original equipment
manufactured by Nanoleaf®. Do not puncture any part of the device with sharp objects, as this will cause the device to cease working as
designed and may present a safety hazard. If applicable, do not use double-sided tape to attach any part of the device to a ceiling or
surface greater than 90 degrees relative to the floor, as the device will eventually fall down—creating a safety hazard and risk of damage to
the device. Optional secure mounting solutions for these use cases are available, sometimes through added accessories o ered for
purchase separately. Your warranty DOES NOT COVER damage caused by falling devices. Do not step on any part of the device, as this will
cause breakage. Do not submerge any part of the device in water, or expose any part of the device to water. If adhesive tape is a
component of this product, please note that it is not designed to be used with unpainted brick wall, wallpaper, uneven/textured surfaces, or
highly porous surfaces. For installation to these types of surfaces, use the optional secure mounting function (accessories available
separately). The flexible cable and power supply cannot be replaced by another third party product. If the cable is damaged, the entire
controller and power supply should only be replaced with original equipment manufactured by Nanoleaf®. Using any non-approved
replacement component will void the warranty and may present a serious safety hazard. Nanoleaf® light panels are primarily intended for
with RGBW output function that can dim.
decorative use,
CE INFORMATION The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the
luminaire shall be destroyed. The light source contained in this luminaire shall only be replaced by the manufacturer or this
service agent or a similar qualified person. NanoGrid Limited (Nanoleaf) hereby declares that this device is in compliance with