Webasto Hollandia 900 Instrucciones De Mantenimiento página 6

9 How to remove Scotchgard™ Paint Protection Film
Film can be removed at any time by picking up a corner of the film and pulling the film off the vehicle
surface at a 90-degree angle. If the film has been present a long time, or if the film and vehicle are
cold, a heat gun or hair dryer may be used to soften the adhesive, allowing easier removal. If any
adhesive remains on the vehicle after removal of the film, it can be removed by using 3M™ General
Purpose Adhesive Cleaner
10 IMPORTANT: It is imperative that the Authorized Installer properly inform the end user "Vehicle
Owner" that while the film "Tape" solution is installed on the vehicle the sunroof will not and cannot
operate. The sunroof should remain inoperative until the film has been removed and the updated
glass panel is installed.
If you have any questions, contact our technical support team:
– USA +1 800 860-7866
info-us@webasto.com
+31 (0) 38 337 11 60
– Others
info-nl@webasto.com
(3M Part #08984).
6