Black+Decker BDXPA0020 Manual De Instrucciones página 4

Paquete de dos temporizadores polarizados para tomacorriente para interiores
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2-Pack Polarized Indoor Outlet Timers
WARNING:
FOR INDOOR USE ONLY. DO NOT EXCEED RATED CAPACITY.
-For indoor use only.
-Keep away from children.
-Do not use with any appliance that exceeds the rating capacity of the timer.
-Always ensure that the plug of controlled device is fully inserted into the timer.
-Clean only with a dry cloth. Do not immerse in water or any liquid.
-Appliances should not be left unattended.
-It is strongly recommended that the timer is not to be used to control heaters or other devices
with heating elements (cooking appliances, fans, irons, etc.).
Instructions
1. To set the current time: rotate the dial clockwise until the time lines up with the TIME NOW
arrow. Note, PM hours are shaded.
2. To program the timer: begin with all segment pins pulled up. Push the segment pins down
for the periods of time you want the timer to be ON. Each segment pin represents 30
minutes: 2 segment pins = 1 hour. Repeats daily.
3. To connect the timer: set the switch on the top of the timer to the TIMER position.
Plug device in to the timer and turn the device on. Plug timer into wall outlet.
4. To override the timer: slide the switch on top of the timer to the ON position. When in the
ON position, the plugged in device is switched on permanently.
5. In case of power failure: reset the timer as explained in Step 1.
125VAC / 60Hz / 1/4Hp
15A/1875W Resistive
10A/1250W Tungsten
4

Publicidad

Tabla de contenido
loading

Tabla de contenido