RiverRidge 06-027 Instrucciones De Ensamblaje página 8

STEP 7
1. Screw 4 cam bolts (A) into pre-threaded holes on middle connection board (1). Do not over tighten.
2. Attach magnet (D) to middle connection board (1) by inserting 2 screws (E) through holes on magnet (D) and
tighten to middle connection board (1).
STEP 8
1. Insert 4 wood dowels (C) into wood dowel holes in end of top cross board (13).
2. Attach right upper support board (11) and left upper support board (12) to top cross board (13) by inserting
wood dowels into wood dowel holes on right upper support board (11) and left upper support board (12).