DR.BEI GF3 Manual De Instrucciones página 12

2. Insert the nozzle firmly into the nozzle socket until it clicks into place.
3. Press and hold the nozzle release button, pull out the nozzle gently, and
restore it into the storage compartment.
Warning: Do not press the nozzle release button when the product is
running.
b. Fill with Water
1.Open the flip top and pull down the water tank part to the usage line.
2.Keep the product upright and pour water in it.
3.Close the flip top once adequate quantity of water is filled.
Clean tap water or purified water is preferred; lukewarm water not over 40 °C (104 °F), saline solution with a salt
concentration of less than 5% or diluted mouthwash are also acceptable.
10
Nozzle Release Button