Backlight/Laser Pointers On/Off; Lock Measurement (Apo) Description - Ideal 61-847 Manual Del Usuario

Backlight/Laser Pointers
Short press the
The white backlight will remain illuminated for about 5 minutes before
automatically turning off to conserve battery power. Or turn the lights off by
pressing and holding the button again. A long press >2 seconds will turn the
laser on or off.
Laser Indication Function On/Off
Short press the
it is turned on, the laser indicator
laser will accurately outline the area you are measuring during temperature
measurement.
NOTE: Please follow the laser precautions when the laser is turned on to
avoid damage to human or animal eyes.
Lock Measurement
Description:
• In the lock measurement function setting interface, the lock measurement
time (1 minute to 5 hours) can be set. Refer to Lock Measurement Setting
for details.
• After setting time, the measurement starts after the activation of the lock
function. When the set time is reached, the thermometer will automatically
power off and save the last measured value.
• You can view the measured values by short pressing (less than 0.5s) the
trigger (NOTE: The measured values will be cleared by a long press). This
operation is applicable to processes that require regular monitoring of
temperature. If no timing is needed, leave them blank.
Operation
1. When the lock measurement function is turned on, short press the trigger
to enable it. The
SCAN icon will flash. The thermometer will continuously measure the
target temperature.
2. Pull the trigger again, the
icon appears. The thermometer stops the measurement and holds the last
measured value.
14
button on the meter to turn the backlight on and off.
button to turn on/off the laser indication function. When
:
icon will appear on the thermometer screen and the
HI OK
3
HOLD SCAN
=
3
=
MAX MIN
AVG DIF
MAX MIN
AVG DIF
will be displayed on the LCD, and the
LO
C F
and SCAN icons disappear, and the HOLD
HI OK LO
HOLD SCAN
C F
15