Ebode VLHD38 Guia Del Usuario página 11

Warning: Do not connect USB HUBS as these are not compatible with the VLHD38.
Never connect the USB A-A Cable to USB in/out ports of Source Equipment like DVD,
Blu-Ray, Satellite Tuners etc. as this can damage both units.
4.5 Receiver Connection (Remote Location)
1. Please connect the VLHD38 Receiver Power via the included Power adapter or the
included USB power cable** before you make the below connection.
(** Please note that when using power from USB the USB port needs to deliver a
minimum of 1.5A. If the USB port has less than 1.5A you could damage the USB port or
a connection could not be established)
2. Connect the VLHD38 Receiver with the included HDMI cable to your Remote screen
and make sure they are perfectly connected.
30-1-2015 11 ebode VLHD38