Tabla de contenido
Publicidad
Timer Button
The time is displayed in minutes and the point will not appear. For example, the readout will display 105 or 90,
as opposed to 10.5 or 9.0.
1. Touching the timer button will cause the digital readout to blink. Use the Up button
timer settings: 00, 10, 15, 30, 45, 60, 75, 90, 105, 120. Use the Down button
settings: 120, 105, 90, 75, 60, 45, 30, 15, 10, 00. Touch the timer button again to confirm and start the
countdown.
2. When the timer function is activated, the digital readout will display the timer in descending minutes. For
example, 120, 119, 118, 117......05, 04, 03, 02, 01, 00). At that time, if the desk's height is adjusted, the readout
will show the height and return to the timer afterwards.
3. When the countdown is finished, the desk will beep 5 times continuously in 3 total successions and remain
stationary.
A639
6
to cycle through the
to cycle through the timer
MG
Publicidad
Tabla de contenido
