Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand and follow the information contained within. The owner
and operator shall have an understanding of this equipment and safe operating procedures before attempting to use.
Instructions and Safety information shall be conveyed in the operators native language before use of this equipment
is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use
and misuse of the equipment. If any doubt exists as to the safe and proper use of this equipment, remove from
service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or otherwise damaged parts (including
labels). Owners and operators of this equipment shall be aware that the use of this equipment may require special
training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any
missing or damaged decals, warning / safety labels or signs be replaced with factory authorized replacements only.
Any engine sling that appears to be damaged in any way, is worn or operates abnormally shall be removed from
service and destroyed immediately.
PRODUCT DESCRIPTION
Omega Load Leveler is designed to use with standard engine crane to safely support load up to 3/4 Ton. It assists
the removal and installation of engine easily by mouting four bolt-thru bracket to the engine. Heavy duty steel frame
helps prevent distortion and twisting. Compliance with factory standards ensure safety, strength and stability.
SPECIFICATIONS
Model
90153
Hanging Chain
Threaded Tilting Rod
Figure 1 - Load Leveler Components
Capacity
Chain Bracket Distance
3/4 Ton
10" ~ 12-1/2"
Tilt adjustment Screw
Chain with Bracket
Sling Bar
Chain Length
12"
BEFORE USE
1. Verify that the equipment and the application are
compatible, if in doubt call
(888) 332-6419.
2. Before using this equipment, read the operator's
manual completely and familiarize yourself thoroughly
with the equipment and the hazards associated with
its improper use.
3. Inspect before each use. Do not use if bent, broken
or cracked components are noted.
4. Ensure that all parts move freely.
WARNING
!
• Study, understand, and follow all instructions
provided before attempting to use this equipment.
• Do not exceed rated capacity.
• Never work under a lifted load for any reason.
• Ensure that the engine is supported securely
before repairing.
• Do not use this equipment for any purpose other
than that for which it is intended.
• No alterations shall be made to this product.
• Failure to heed these markings may result in
personal injury and/or property damage.
2
Frame Size (L x W)
18" x 7-5/8"
Omega Technical Service
Publicidad
Tabla de contenido
