Assembly - Better Homes and Gardens BH16-093-099-04 Instrucciones De Montaje

Assembly

Connecting the leg to the table top
1:
Put the table top (F) as shown. Connect the leg
(G1, G2) to the table top (F) with eight nuts (AA)
Do not over tighten.
3: Attaching connecting tube to the leg
Place the table top (F), cross connecting bar as
shown. Attach connector (H/I) to the
assembled leg (G1, G2) using eight bolts (BB)
and eight washers (CC) .Fully tighten all the
previously assembled bolts.
Connecting the leg connecting
2:
tube to the cross connecting
bar
Fig1: Put leg connecting tube (H) to the cross
connecting bar (I), repeat this step for each
bar.
Fig2:Attach the leg connecting tube(H) to the
cross connecting bar(I) using 8 bolts(BB) and 8
washers(CC).Do not completely tighten the
bolts(BB).
4: Attaching the ash tray to the
bowl
Attach the ash tray (E) to the bowl (D) using
three bolts (DD) and three nuts (EE), as
shown.