Glacier bay 67556-0001 Guía De Uso Y Mantenimiento página 5

Installation
1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is for ange installation (optional). If the
ange will not be used, install the faucet assembly as
described in step 2.
□
Place the ange (H) on the bottom of the new
faucet assembly (A).
□
Insert the faucet body through the hole in the
sink.
A
H
5
2
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Place the escutcheon (F) and the gasket (G) on
the bottom of the new faucet assembly (A).
□
Insert the faucet body through the hole in the
escutcheon (F).
NOTE: If the sink is uneven, use silicone under the
gasket (G).
Please contact 1-855-HD-GLACIER for further assistance.
A
F
G
HOMEDEPOT.COM