Ellington BHS036157386001 Manual Del Usuario página 8

Assembly Instructions
CAUTION:
Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item.
Two people required to assemble heavy item. After final alignment, make sure all bolts are securely tightened
in place.
Remove the parts from the carton and take off all protective material. Identify all parts packed in the carton
against the parts list.
WARNING: Do not tighten bolts until product is completely assembled.
1
Place the Seat Assembly (A) onto a non-abrasive surface, such as a carpet, with its underside facing upwards.
Fasten the Front Leg (B) and Rear Leg (C) to the seat assembly by using bolts (G) and washers (F). Make sure
all of bolts have been tightened completely.
B
2
Turn the chair to its upright position.
C
Page 8 of 8
A
G
F
Weight limit:225 lbs