Descargar Imprimir esta página

MAINLINE MLS10006 Instrucciones Para La Instalación página 2

Servicios del pedestal

Publicidad

Idiomas disponibles

Idiomas disponibles

RECOMMENDED TOOLS FOR INSTALLATION
• Stud Finder
• Drill
• Wrench
INSTALLING YOUR PEDESTAL AND BASIN
1 – Locate proper position for pedestal and basin in your bathroom. Be sure to have access to
plumbing and drain fittings.
2 – Place basin on pedestal and adjust its position against the
wall. The basin should be level using the carpenter's level. Mark
the wall with a pencil at each mounting hole on the underside of
basin.
3 – Carefully remove the basin from pedestal and install faucet
according to the faucet manufacturer's instructions.
DO NOT OVERTIGHTEN THE NUTS.
SEVERE DAMAGE MAY OCCUR.
4 – Use a stud finder on the pencil marks to check for wall studs
before drilling holes into the wall.
If you drill into a stud go to NO. 5 and then NO. 7
If you drill into a sheet rock go to NO. 6 and then NO. 7
5 – If you drill into a stud – use the 1/8" drill bit to drill the holes into
• Carpenter Level
• Caulk
• Pencil
CAUTION:
.

Publicidad

loading

Este manual también es adecuado para:

Mls10025Mls10007Mls10026Mls10009Mls10028Mls10037 ... Mostrar todo