WOOX R7056 Guia De Inicio Rapido página 5

5. Factory reset
a. Entering the setting menu, press number "6" to navigate to "Setup" option.
b. In "Setup" menu, press number "7" to navigate to "System reset" option.
c. In "System reset" menu, press number "1" to select "Yes".
d. Press to confirm factory reset.
Pair the smart lock with Woox home app
1. Download and install the app "WOOX Home" from Apple App Store or Google Play
Store on your mobile device.
2. Launch the app "WOOX Home".
3. Create a new account or log in to your existing account.
4. Tap "+" to add the device.
5. Select the applicable product type from the list of products.
6. Select a zigbee hub.
7. Set the lock to configuration mode.
a. Press button on the lock and input admin password to enter setting menu .
b. Press number "6" button to navigate to "Setup" option, press to confirm.
c. Press number "3" button to navigate to "Zigbee" option, press to confirm.
d. Select "Connect" option, press to enter configuration mode. You will see
"connecting" in the display, now it's ready to pair to zigbee hub.
8. Press confirm button in the Woox home app.
9. The app will now search for the device and register is to your account.
10. Enter the device name, done!
• Read the manual carefully before use. Keep the manual for future reference. Only use
the device for its intended purposes. Do not use the device for other purposes
than described in the manual. Do not use the device if any part is damaged or
defective. If the device is damaged or defective, replace the device immediately. The
device is suitable for indoor use only. Do not use the device outdoors. Do not expose
the product to water or moisture. Do not touch the device with wet hands.
Cleaning and maintenance Warning!
• Do not use cleaning solvents or abrasives / Do not clean the inside of the device.
• Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.
wooxhome.com
4
English