Crosley Ridgemont Manual De Instrucciones página 11

English
3. Press the Program button to confirm the selected track. The LCD's
number will start flashing again showing the next track sequence which is
to be edited.
4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.
The tracks can be in any number and repeated. A maximum of 20 tracks
can be programmed at one time.
5. Press Play/Pause button to start the programmed playback. The tracks
will play in the same sequence that you programmed earlier.
6. To exit the program mode, press the Stop button twice and the Program
Indicator will be off.
Folder/Album Playback
If your MP3 CD is separated into folders, follow the steps below to access the
folders.
1. While the CD is stopped, press the Folder Up or the Folder Down buttons on
the remote to advance forward or backwards through the folders on your disc.
2. Once the desired folder is reached, use the Forward Skip or the Backward
Skip buttons to select the desired track.
3. Press the Play button to begin playback of the selected track.
Cassette Operation
1. Rotate the On/Off Volume Knob to turn on the power.
2. Press the Tape button to set the unit to Tape mode.
3. Set the Function Switch to TAPE position.
4. Insert the prerecorded cassette into the cassette tray, and press the Play
button.
5. To fast forward, press the Fast Forward button in. To stop fast forwarding and
return to the playback mode, press the Play button.
6. To rewind, press the Rewind button in. To stop rewinding and return to the
playback mode, press the Play button.
7. To stop the playback, press the Stop/Eject button once. To eject the cassette,
press the Stop/Eject button again.
Note: Remove the cassette from the cassette holder when it is not in use.
11