Safety Advice - BGS technic 8332 Manual De Instrucciones

SPECIFICATIONS
Delivery volume: about 500 cc per stroke
Applicable liquids: AUS32
Applicable temperature range: about -5°C ~ +45°C
Main materials: Polypropylene, Polyethylene, Viton / FKM
Applicable on 60 / 200 / 220L barrels
IMPORTANT
Keep this manual in a safe, dry place for future reference.
Read all precautions and instructions carefully before using this product.

SAFETY ADVICE

•
Do not use one pump for more than one type of liquid.
•
Do not use the pump for liquids for which it is not intended.
•
Observe all safety regulations of the liquids you want to transfer with this pump.
•
Operate the handle smoothly to prevent the pump head from getting damaged.
•
Do not place the pump head upside down, which would cause the remaining liquid to leak out
of the discharge hose.
OPERATING INSTRUCTIONS
How to assemble the Suction Pipes
1. Thread Suction Pipe B into Suction Pipe A.
2. Thread Suction Pipe A+B into Suction Thread Hole.
3. Adjust the length of Suction Pipe C to fit it with the height of the
Drum and fix pipes B+C with Joint Nut.
Length of assembled suction pipes:
Suction Pipes (A+B+C) 690 - 980 mm
Suction Pipes (B+C) 350 - 640 mm
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Lever Barrel Pump
Water
Lubricants
Windshield Washer Fluid
Antifreeze
Mild detergents
Agricultural chemicals, etc.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8332
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed