Descargar Imprimir esta página

Panlux SL2502/B Guia De Inicio Rapido página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

MODEL:
SL2502/B
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should
be provided by qualified person or company.
Thank you for choosing the product of company PANLUX s.r.o.
Technical data
Angle of detection: horizontal – 360°, vertical – 130°
Recommended installation height: 2,5m
Material: plastic
Switching element: relay
Notice
Before using, check the product and make sure there that it is not damaged, otherwise do not use it. Before any manipulation
make sure that mains electrical supply is disconnected. In case of damage do not repair or disassemble the product. The
incorrect function of the product can be caused by interruption of electromagnetic field, small temperature difference
between moving object and surroundings, reflection (e.g. strong luminous source).
Infringement of any mentioned instruction can cause harm to health or property.
Installation
1
2
65mm
60mm
230V~50Hz
49mm
75mm
MAX
230V
IP20
6,3A
~50Hz
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor notices
the change and initiates trigger order „Light on" for adjusted time.
Reach setting (sensitivity) – max. 5m
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Time setting (switch-off delay) – TIME (10s (±5s) až 15min (±2 min))
The countdown of adjusted time begins after last detected movement. We recommend setting the function on minimum
during functional test.
Twilight setting (response threshold) – LUX (3 – 2000lx)
We recommend setting the function on maximum during test.
Stated information may differ according to position and installation height.
Position marked 3 applies to minimum and position marked
Warranty void if the product is mechanically damaged or connected unprofessionally.
L`
3
N
L
L
N
4
SENSOR SL2502
LUX
SENS
TIME
max. 1200W
5m
3m
5
6
All right reserved.
Technical data can be changed without previous notice.
LED
max. 300W
0-250W
3x1,5mm
C
0,095kg
2
applies to maximum.
3m
5m
0m
5m
3m
3m
5m
UM_SL2502_150608

Publicidad

loading