Tripp-Lite 338-CF-SATA-5G El Manual Del Propietario página 4

Installation
Notes:
• Hard drives are sensitive to static electricity and
• If your SATA hard drive has not been formatted,
• Before unplugging the adapter, make sure to
1. Connect the built-in USB-A or USB-C plug
2. Insert a CFast Memory Card into the
3. Insert a SATA drive into the appropriate port
18-08-220-933834.indb 4
must be handled properly to prevent data loss.
Always handle your hard drive with caution: wear
an anti-static strap, such as the Tripp Lite
P999-000, when transporting it, or touch a
grounded metal surface to discharge yourself of
static electricity before picking up the drive.
you will first need to format it using your
computer's Disk Management utility.
properly eject the drive from your computer to
avoid any potential data loss.
on the device to the USB-A or USB-C port
on your laptop, tablet or computer.
appropriate port on the device.
on the device. Take care to keep the drive
at a low angle to minimize stress on the
connector.
4
9/6/2018 9:52:21 AM