Tripp-Lite U444-06N-HV4GU El Manual Del Propietario página 4

Installation
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac,
you would navigate to the Network section found in the
System Preferences, click the 'Assist Me' button to get to the
Network Setup Assistant, then follow the prompts to establish
a connection.
1. Connect the adapter's USB Type-C connector to
2. Connect the adapter's HDMI port to the monitor's
3. Connect a USB device to the adapter's USB-A hub
4. Connect the adapter's RJ45 port to a network
18-08-022-9337A7.indb 4
the USB-C port on your laptop, tablet or other
compatible device.
HDMI port using an HDMI cable (such as Tripp Lite's
P568-Series HDMI cables).
OR
Connect the adapter's VGA port to the monitor's
VGA port using a VGA cable (such as Tripp Lite's
P502-Series High-Resolution VGA cables with RGB
coax).
port.
using a UTP cable (such as Tripp Lite's N201-
Series Cat6 cables).
4
8/21/2018 10:24:55 AM