Axis T8133 Midspan 30W Guia De Instalacion página 11

AXIS T8133 Midspan 30W
1
2
3
NOTICE NOTICE NOTICE
• Do not cover the midspan or block the airflow to the PoE with
any foreign objects. Keep the midspan away from excessive heat
and humidity and free from vibration and dust.
• Ensure that the cable length from Etherhet network source to
the terminal does not exceed 100 m (330 ft). The PoE is not a
repeater and does not amplify the Ethernet data signal.
• If a splitter is to be used, make sure it is connected close to the
terminal and not on the midspan.
• No ON-OFF switch exists, simply plug the midspan into an AC
power source.
Troubleshooting
AXIS T8133 does not power up
•
1
Port LED indicator
DATA & POWER OUT (connect to Axis product)
DATA IN (connect to network)
Remove and re-apply power to the device and check the
indicators during power up sequence.
11