AmazonBasics B07JW1YSRH Manual Del Usuario página 5

Forced pairing and connection with new devices
• When the system is on in Bluetooth mode it will automatically pair with the last device. To force
pair it with a new device, press and hold the source button for 3 seconds. The blue light will
begin blinking. Now search your new device Bluetooth list for "AmazonBasics Speakers" and
tap to connect/pair.
AUX IN Connection
Connect to audio output port of the source
• Speakers default to Bluetooth mode when initially turned on. Press the Source button once and
you will hear a notification alert as the system switches to AUX IN mode. The LED status light
will change to solid GREEN.
• Connect your source device to the AUX IN jack.
Troubleshooting
Speaker isn't working
• Make sure the speaker system is getting power.
• Make sure the speaker system is connected to the audio source either via Bluetooth or Aux
input.
There is no sound
• Make sure your speakers are on and that the power LED lights up.
• Adjust the speakers' volume.
• Make sure your device is not muted.
• Turn up the volume on your device.
Sound is distorted or of poor quality
• Lower the volume of your speakers or connected device.
• Move other electrical devices away from the speaker.
• Make sure the power connection is secure.
• Adjust the volume settings on the audio device
• Move the speakers farther apart from each other.
RIGHT
AUX
Aux cable included
LEFT
5