Technical Data; General Informations; Safety Informations - BGS technic 9872 Manual De Instrucciones

TECHNICAL DATA

Gas type: Butane
Gas capacity: 10 g
Gas consumption: 16.5 g/h
Heat value (Hs): 0.227 KW
Carbon monoxide: 0.0182%
Ignition device: Piezo ignition
Appliance category: Direct pressure (butane)
Total weight: 210 g (with gas)
Ambient temperature: 23.8 °C

GENERAL INFORMATIONS

Its high flame temperature of the pocket gas torch is suitable for soldering, flambé, and therefore finds
use in the workshop and kitchen. The torch is equipped with piezo-ignition, lock switch and flame size
regulator. The gas tank with 10g volume can be filled with conventional lighter gas.

SAFETY INFORMATIONS

Please read all the instructions and warnings before use.
 Keep children and unauthorized persons away from the working area.
 Do not let children play with this tool or its packaging.
 Ensure the working area has adequate lighting
 Keep working area clean and tidy, dry and free from unrelated materials
 If you refill the torch gun, please reverse the torch gun and push butane cylinder against the gas
charging valve. After charging, wait several minutes until the gas is stabilized.
 Be careful when use the torch gun near the fire source, heater or inflammable.
 Please do not touch the nozzle while using or immediately after use, otherwise you may get
scalded.
 Please make sure there is no flame in the product and it has already been cooled down before
storing.
 A dismantling or repairing is permitted only trained persons.
 Do not use the gas burner continue, make occasionally a cool down break.
 ATTENTION: Use only butane gas, any other gases are not allowed !
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Pocket Gas Torch
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9872
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed