Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Press the Power switch to "I" to turn on heater.
2.
Press " " button, the heater will start running automatically;
3.
Press "Temp. +" button to increase the temperature setting. (60 °F ~ 90 °F) or
4.
press "Temp. -" button to decrease the temperature setting (60 °F ~ 90 °F).
Power-on Timer: When the heater is off, Press "Timer" the digital display shows the
5.
"Hours" option for the timer. Continue to press the timer button to change the
number of hours you would like the heater's internal clock to count down before
powering itself on. The Hour options for the timer are from 0 to 12 hrs. (in 1 hour
increments).
Power-off Timer: When the heater is running, press "Timer" the digital display
6.
changes from the "Temperature" to the "Hours" option for the timer. Continue to
press the timer button to change the number of hours you would like the heater to
run before powering itself off. The Hour options for the timer are from 0 to 12 hrs. (in
1 hour increments).
When finished using, press " " button, the heater will cool down automatically in 1
7.
minute. Once Digital display shows "- -", press the power switch to "0" to turn off
heater.
Unplug heater from power outlet.
8.
Cleaning Instructions:
1. Turn the Power Switch to the '0' position. Disconnect the heater from the electrical
outlet.
WARNING: Do not expose the heating elements or switches to water, cleaning liquids or
other chemicals, as fire, electrical shock, personal injury and properly damage can occur.
CAUTION: Do not use gasoline, benzene or thinner to clean your heater, as these chemicals
can cause surface damage.
2. Use a vacuum cleaner with a crevice tool to remove dust from the vents in the front and
back of the heater.
3. Use a clean, soft and lightly damp cloth to gently wipe the surface of the enclosure.
4. Allow the enclosure to dry completely prior to operating your heater.
OFF-SEASON STORAGE INSTRUCTIONS: Place your heater in its original shipping
container, or a similar container. Store the container in a cool, dry location.
SAFETY FEATURES
OVERHEAT PROTECTON
Your heater is equipped with an Overheat Protection System. When the threshold
temperature has been reached, your heater will turn off automatically.
To reset your heater after the Overheat Protection System has been activated:
1. Turn the Power Control Switch to the 'O' position and turn the Temperature Control
Switch to the lowest setting.
2. Disconnect the power cord from the electrical outlet. Allow your heater to cool down for
approximately ten minutes.
5
Publicidad
Tabla de contenido
