Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEAM IRON WITH BOILER
12
•
Before replacing or cleaning, unplug the device from the
power supply outlet and wait until it has completely cooled down.
•
Don't use the device outdoors.
•
Don't use the device close to curtains, furniture or other
inflammable objects.
•
Caution: the steam is very hot, burns danger. Never direct the
steam jet towards persons, animals or objects that could be damaged
or burned.
•
Use only tap water or demineralized water to fill the boiler.
Other liquids could damage components and gaskets causing the loss
of the guarantee of the product.
Don't fill the boiler with too much water.
•
Don't put other liquids or other materials or additives in the
boiler.
•
If the cap doesn't open easily, don't try to open it.
•
Always place the iron on a stable, flat and heat-resistant
surface.
•
Don't load weights on the monotube nor try to squash it.
•
Don't wind the cable around the device.
•
Check carefully that the label of the fabric to iron matches the
setting and the temperature of the iron.
•
Always place the iron on its seat on the boiler, don't let the
iron put on fabrics or elsewhere.
INSTALLATION
Take the device out of the box and remove the packing. In order to
ensure a
sufficient ventilation, the distance between iron and the wall or other
objects should
be at least of 15cm on the back and of 15cm on the side.
Publicidad
Tabla de contenido
