To Reconfigure for Right-Side Mounting:
a.)
Place the latch on a flat surface, with the "finger"
brackets facing the right, as shown (Fig. 5).
b.) Carefully remove spring from the post plate and
swing arm with small needle-nose pliers, using
caution not to bend or break the hooked ends of
the spring (Fig. 6).
c.)
Flip the post plate over so the "finger" brackets
face the left and re-attach the spring, as shown
(Fig. 7).
d.) Continue installation from Step 1.
4
"Finger"
Fig. 5
Fig. 6
Fig. 7