Troubleshooting - Team kalorik WCL 20629 Manual De Instrucciones

Fax +32 2 359 95 50

TROUBLESHOOTING

Symptoms
–
The appliance
does not cool –
–
–
The temperature
inside is not cold –
enough
–
–
There is an odd
–
smell inside the
cooler
–
The inside light
flashes
–
There is frost
inside the
appliance
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
Possible cause
Plug not connected
to power source;
Low voltage;
Fuse has tripped
The cooler is placed
too close to a heat
source;
Bad ventilation;
Fans don't work;
The door is not
closed tightly or
opened too
frequently or for too
long time;
Check whether
anything inside has
spoiled
Set the temperature
higher than the inner
temperature;
Too much humidity
or too low of a
temperature inside
the case
9
Assembly page 9/20
Solutions
– Check if the
plugged in and if the wall
outlet is operational.
– Ensure the voltage of the
wall outlet is compatible
Change the fuse
–
– Keep the cooler away
from direct sunlight
other heat sources.
Place the cooler in an
–
area with good ventilation
and make sure that the
fans are clear from foreign
objects.
– Check whether the unit is
connected to a power
source.
Close the door tightly and
–
don't open the door too
frequently or for too long.
Use the unit standalone,
–
never built-in.
– Wrap the source of the
smell or remove it.
Clean the cavity with pure
–
baking soda.
Only use the unit to store
–
wine or bottles.
Adjust the temperature.
–
– Unplug the unit,
defrost completely, and
then connect to
outlet again
removing the
remaining inside the unit.
WCL 20629 - 140728
unit is
or
let it
wall
after
water