Start-Up; Bluetooth Name; Password; Speed Regulator - Pact URBANGLIDE BIKE 140 Manual Del Usuario

10. Start up

11. Bluetooth Name

In the "Bluetooth name" setting, you can change the Bluetooth
name. The name will apply the next time you connect to the
device.

12. Password

13. Speed regulator

In order to use the speed regulator, it must first be activated in
the settings, heading "Cruise". Once activated, hold down a
speed for 8 seconds, when the light at the bottom of your
bike's display flashes, release the accelerator, and the speed
will maintain.
The "Startup" setting allows you two startup choices:
1. Zero speed start: which allows you to accelerate
directly when the bike stops.
2. The non-zero start: which allows you to accelerate
only when the bike has already taken a little speed
with the help of your feet.
You can change the password that allows you to lock / unlock
your bike.
To do this, register simply with your old password, then enter
your new password.
If you want to change the password for the first time, use the
original password "123456" and enter your new password.
7