LucidSound LS10N Guía De Uso página 4

MICROPHONE
EN
The LS10 includes an optional
boom microphone. When
this microphone is removed,
an internal microphone is
activated.
To connect the boom
microphone, insert it into the
port on the bottom of the
headset.
NINTENDO SWITCH SETUP
Connect the headset to the 3.5mm output on the
1
Switch.
2 Press the volume up button on the Switch until the
volume is 100%. You can now use the volume control
wheel on the headset to control the volume.
!!! IMPORTANT !!!
For set up and FAQs
go to:
https://bit.ly/2TlLFQ4
SW