Publicidad
Idiomas disponibles
Idiomas disponibles
LOCATING THE AIR CLEANER
1. The air cleaner can be mounted on the right or left side of the HVAC equipment (FIGURE 2).
2. The door can be facing the front or rear of the HVAC equipment cabinet (FIGURE 2).
3. The door and blanking plate are reversible to allow filter access from the front or rear of the HVAC equipment cabinet (FIGURE 2).
4. Leave sufficient space for the removal of the filtering media (FIGURE 3).
FIGURE 2
The door and blanking
panel are reversible to
allow filter access from
the front or back.
BLANKING
PLATE
EASY TO INSTALL AIR CLEANER FEATURES
The air cleaner has many features to make retrofit easier:
1. The cold air return opening is adjustable between 8" and 10". This is done by bending up the appropriate tabs. The 8" dimension can be offset to
the right or left by moving the "L" bracket to either side to match up with the location of the return drop.
FIGURE 4 – 8" x 24" OFFSET RIGHT
L BRACKET
2 English
DOOR
BEND UP TABS
10-11490
FIGURE 3
FILTER REPLACEMENT CLEARANCE
27 FOR MODEL 1620
10-11481
FIGURE 5 – 8" x 24" OFFSET LEFT
BEND UP TABS
29 FOR MODEL 1610
10-11483
L BRACKET
10-11490
Publicidad
