HumanTechnik lisa time S Instrucciones De Servicio página 7

lisa time S is an electronic
digital clock with a receiver to
the lisa signalling system. It
wakes you up using a flashing
light and/or vibration and/or
acoustic signal. Additionally,
the wake-up or lisa signal is
issued through a switched
socket.
Using your clock
Plug the mains plug of the lisa
time S into a 230V mains sok-
ket. The display flashes as a
sign that the time is not cor-
rectly set. As soon as the time
has been set the flashing
stops.
Setting the time
Keep the button and the h
or min button pressed simulta-
neously to set the desired
time.
Setting the alarm time
Keep the button and the h
or min button pressed simulta-
neously to set the desired
alarm time.
Checking the alarm time set
Press the button , the
alarm time shown is in the
display of the alarm clock. A
flashing dot between the hour
and the minutes on the display
shows that the alarm has been
set.
Alarm signal
After reaching the alarm time
set the lisa time S starts to
issue flashing lights and/or an
acoustic signal depending on
the setting. If a vibration cus-
hion is connected the vibration
pulse is also simultaneously
triggered. With the switched
socket the alarm signal can be
passed to a lamp or a vibration
system. If an alarm signal is
not interrupted by pressing the
"Alarm Stop 9 min" or the
"Alarm Stop 24h" button, the
alarm signal is repeated after 4
minutes (auto snooze).
Interrupting/switching off
the alarm signal:
For 9 minutes (snooze):
By pressing the snooze button
"Alarm Stop 9 min"
For 24 hours:
By pressing the
"Alarm Stop 24 h"
For a longer period (week-
end, holiday):
Reset the switch on the back
to 0
English 7