tibelec EM666B1 Manual De Uso página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Replacing the battery/fuse
-
+
The consumer is obliged by law to recycle all used batteries and accumulators.
It is forbidden to throw them in the ordinary bin! Refer to the environmental
protection details.
Model n°EM666B1
- 1xLR03/AAA 1,5V battery included
- Protective fuse 630mA/300V 5x20mm
- Size and Weight: 28x85x119mm / 165g (with battery)
- Safety standard: 300V CAT III
- Complies with EN 61010-1
Tibelec guarantees the quality and reliability of this product's components: this item is
legally required to be accompanied by a 2-year warranty for flaws and latent defects
in accordance with articles 1641 to 1648 of the Civil Code. Our technical support
service is available for advice and assistance; please contact us at qualite@tibelec.fr.
Tibelec cannot be held liable for damage caused by incorrect use, poor maintenance,
misuse of the product, normal wear and tear, damage from falls, or opening of the
fixture. Tibelec cannot accept returns for replacement of the consumable items (bulbs,
transformers, glass, etc.) that are required for the use of this product. The replacement
12
1. Loosen the 2 screws on the back of the tester and unclip
the front panel.
2. Replacing the battery: check the wear and tear of the
battery included in the tester. To do this, set the switch
to Ω (X10 or X1k) and bring the 2 plungers into contact;
if the needle does not move or does not reach 0 on the
OHMS scale, replace the battery.
3. Replacing the fuse: check the condition of the fuse
included in the tester (it may be damaged due to
mishandling). To do this, leave the fuse in its slot and set
the switch to Ω (X10 or X1k). Put a plunger on each side
of the fuse; if the needle does not reach 0 on the OHMS
scale, replace the fuse.
Protected by
standard fuse
Certified in
accordance with
European
standards
Risks resulting
from hazardous
voltages
of consumable items is your responsibility.
Imported by tibelec 996 rue des hauts de Sainghin CRT4
59262 Sainghin en Mélantois - France
Class II equipment
without ground
connection
Do not dispose of
appliances bearing
this symbol with
domestic waste.
Use a suitable
collection point.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

976530

Tabla de contenido