Logitech X50 Manual Del Producto página 5

Logitech X50
Connection – via Bluetooth
3s
10 m (30 ft)
– – – – – – – – – – – – – – – – – – – – – –
Pairing your first device
When you turn X50 on for the first time, it automatically goes into pairing mode and searches for
a Bluetooth source device to pair with. X50 works with Bluetooth-enabled devices that support
Advanced Audio Distribution Profile (A2DP), such as smartphones, tablets and personal computers.
Pairing additional devices
To pair X50 with additional source devices, press and hold the Power / Bluetooth pairing button
for 3 seconds. X50 will enter pairing mode, make a sound, and flash its Bluetooth LED while
searching for another device. Once the next device is paired with, X50 will sound to confirm
pairing and the Bluetooth LED will remain solid blue.
X50 will remember the last 8 devices it was connected to. The next time the speaker is turned
on, it will attempt to reconnect automatically to the last device it was connected to before it was
turned off.
X50's Bluetooth range is approximately 10 meters, or 30 feet. If you take your source device out
of range, the connection will be suspended. X50 will automatically reconnect if the source device
is brought back in range within 5 minutes. After 5 minutes, the active connection will be dropped.
English 5