Quoizel LWS3747B Manual Del Usuario página 2

STEP 1:
Note : Place a cloth or towel on the ground under the
work area to prevent loss of mounting hardware if
dropped.
a. Secure the Crossbar to the outlet box (not included)
with Outlet Box Screws.
Note : The Crossbar should be adjusted accordingly to
match the holes on the backplate of the Fixture Body.
Then, tightened the loosened center screw
preassembled on crossbar assembly to lock the
position of the mounting screws.
STEP 2:
a. The lanyard is provided as a means to support the
fixture from the junction box while connecting the
electrical wires. This enables the fixture to hang from
the junction box and your hands are free to make the
wire connections.
b. Turn the button stop so it may be inserted into the
crossbar slot. Make sure the button stop is completely
inside the crossbar.
c. Slowly release the fixture to make sure it is supported
by the button stop.
d. Proceed to Step 3. Once wiring is complete, the lanyard
will push into the junction box when the Backplate is
Attached to the wall.
STEP 3:
* Use Wire Connectors (supplied) to connect the
wires.
a) Ground Wire:
1. Wrap supply ground wire
on mounting bracket, no less than 2 in. from the end of
the wire. Tighten ground screw
2. Connect fixture ground wire
with wire connector.
b) Supply Wire:
1. Connect the supply white wire
supply wire with wire connector.
2. Connect the supply black (or red)
fixture supply wire
3. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
outlet box.
STEP 4:
a. Line up holes on the backplate and mounting holes on
the folded edge of the crossbar.
b. Secure by threading mounting screws into the mounting
holes on the crossbar.
c. Thread screws into side first. Do not fully tighten.
d. Thread screws into other side and tighten with
screwdriver.
e. Tighten first side screws with screwdriver.
2019 QuoizelInc.
around green ground screw
.
to supply ground
to the white fixture
wire to the
with wire connector.
Button Stop
GREEN GROUND SCREW
GROUND WIRE
FROM SUPPLY
wire
FROM SUPPLY
black
BLACK (OR RED) WIRE
FROM SUPPLY
2
Outlet Box
Slot
Lanyard
GROUND WIRE
FROM FIXTURE
WHITE
FROM FIXTURE
FROM FIXTURE
Crossbar Assembly
Mounting Screw
Outlet Box Screw
Crossbar Assembly
WHITE
BLACK