Kenwood STZ-RF200WD Manual De Instrucciones página 16

LED status display
State
System check at start-up (from
startup to the start of recording)
• Continuous recording
(unsynchronized time)
• Continuous recording
(synchronized time)
• Wireless LAN (waiting for
connection)
• Wireless LAN (connected)
• Event recording
• Manual recording
Error (press the switch to display
error details)
Updating firmware
SD card error*
(displayed for 5 seconds)
Front camera error*
(displayed for 5 seconds)
Rear camera error*
(displayed for 5 seconds)
GPS error*
(displayed for 5 seconds)
High temperature error*
(displayed for 5 seconds)
Wired switch error*
(displayed for 5 seconds)
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
Blue
Orange
LED display pattern
16
Blue lit and orange blinks once per
second
Blue lit, orange unlit
Orange lit, blue blinks once per second
Blue and orange lit
Orange lit, blue unlit
Orange lit, blue unlit
Blinks for 0.5 seconds over 5 seconds
Blue blinks for 0.5 seconds and orange
is lit over 5 seconds
Blue is lit and orange blinks for
0.5 seconds over 5 seconds
Blue is lit, orange will blink twice every
0.5 second with a 0.2 second interval
between each blink for 5 seconds
Blue will blink twice every 0.5 second
with a 0.2 second interval between each
blink and orange is lit for 5 seconds
Blue and orange will both blink twice
every 0.5 second with a 0.2 second
interval between each blink for
5 seconds