Technical Specifications - Duronic BFH20 Manual De Instrucciones

Ocultar thumbs Ver también para BFH20:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Safety Instructions (Continued)
Do not touch the hot surfaces.
Always ensure that your hands are dry before operating or adjusting any switch on the
product or touching the plug and socket.
Do not leave this appliance unattended when it is in use.
The most common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by disconnecting the appliance and then
vacuum cleaning the air vents and grills.
Do not place the heater on a carpet or put the cable under a carpet.
Place the cable in such a way that it is not in any high traffic area to avoid it being
tripped over or stood on.
Do not put the heater away until it has cooled down completely. Store the heater in
cool dry location when not in use.
This product is only suitable for well insulated spaces or occasional use.
Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
If the machine is operated with a defective or damaged mains cable,
there is a potential danger of fatal electric shock.
Never use a machine which is damaged or has a damaged mains cable.
In order to avoid a hazard for very young children, this heater should be
installed so that the lowest part of it is 120cm above the floor.

Technical Specifications

Model
Rated Voltage
Rated Frequency
Rated Power
Protective Class
IP Code
BFH20
220 - 240V
50-60Hz
2000W
II
IP24
6
Installation
This heater should be installed in accordance
with the British IET BS 7671 Regulations.
As a general guideline, please see the below diagrams which
illustrate how and where to install the heater safely.
Step 1
Step 4
Step 2
Step 3
Step 5
7

Publicidad

Tabla de contenido
loading

Tabla de contenido