Samsung 6500 Serie Manual Del Usuario página 18

4
Software Upgrade:
Upgrading the
software to the latest
version
To upgrade later,
✎
select Skip.
5
Auto Tuning (1):
Select where your TV
signal comes from.
6
Auto Tuning (2):
Select the search
options.
When the Network Settings is complete, your TV will check for a
new software version automatically. If new software is available, the
TV downloads and installs the new software. When the download is
complete, select Next.
If you want to upgrade later, select Skip. For more information, refer
✎
to Software Update (Preference Features → Support Menu) in the
e-Manual.
This may take some time, depending on your network status.
✎
You can only upgrade software if your TV has an active network
✎
connection.
If no new update software is available, a the no new updates
✎
message appears on the screen. Select OK.
Select the appropriate option for your TV using your remote, and then
select Next.
• Yes, I need to.: Select if you have an antenna or a cable connection
without a set-top box. If you select this option, go to 6 - Auto Tuning
(2) Step.
• No, I don't need to.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Tuning. If you select this option, go
to 8 - Clock on the next page.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. If you selected Cable, you'll go to the cable system screen. Select
Digital Cable System. The option window appears. Select the correct
cable signal format; STD, HRC, or IRC. Most cable systems use STD
(Standard). Repeat the same process with Analog Cable System.
3. When done, select Next.
English - 18