NU Skin ageLoc me Manual De Instrucciones página 4

1
EN
1
Select the right plug for your country.
A. EU plug B. GB/IE plug
2
Insert the plug onto the power adapter and turn clockwise until you
hear a click.
3
Remove existing battery cover from the ageLOC Me® device. Remove
batteries if any are installed.
4
Install the power base onto the battery compartment of the ageLOC Me
device, aligning the tabs and closure as illustrated.
5
Plug the wall adapter into the wall socket. Refer to the ageLOC Me User's
Manual for device operation.
4
2A
CLICK
2B
WarnIng
• This appliance is not intended to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instructions
concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not to play with the
appliance.
• Do not use the appliance if it appears to be damaged or broken to avoid injuries.
• Only use the ageLOC Me® power base and the power supply plug-in adapter
as supplied.
• If the appliance is damaged, always have it replaced with one of the original
type to avoid a hazard.
• The adaptor contains a transformer. Do not cut off the adapter to replace it
with another plug, as this causes a hazardous situation.
CLICK