Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PW-50 v3
PW-50 v3
SETTING UP FUNCTIONS
Setting up HORN tone
The default tone is American HORN, although the equipment allows to choose between
American HORN and B&G HORN, as explained below.
1. Press and hold HORN .
2. While HORN is held, press and hold
SIREN (3 s) until the tone changes.
Setting up SIREN
SIREN function allows to choose among 4 different tones: WAIL, Hi-Lo, PHASER & YELP.
1. Press and hold SIREN (5 s) until the
2. Press HORN to choose among tones.
siren sound briefly pauses.
Setting up AUX
AUX allows to either play an auxiliary siren tone, or change the activation state of an
auxiliary load up to 10 Amp (useful to manage a light set or other devices).
1. Press and hold AUX (5 s).
2. Press SIREN to switch among AUX
If it beeps, it's set to AUX LOAD.
LOAD and AUX SIREN.
If siren stops & restarts, it's set to SIREN
Setting up AUX SIREN tone
Once AUX function is setup to AUX SIREN, it is possible to select the AUX SIREN tone to
one of the available tones (WAIL, Hi-Lo, PHASER or YELP).
It is not possible to set the same tone for both SIREN and AUX SIREN, meaning that while
setting AUX SIREN, the SIREN tone in use will be unavailable; also, if the AUX SIREN tone
is selected for SIREN, AUX SIREN's tone will automatically change.
1. Press and hold AUX (5 s) until the
2. Press HORN to switch among the
siren sound briefly pauses.
available tones.
Setting the volume of the internal speakers, "internal volume"
1. While INTER is on, press and hold
2. While INTER is held, press WAIL to
INTER .
increase volume.
6
6
3. To change tone again, repeat steps
1 & 2.
3. Press SIREN to fi nish setup.
3. Press AUX to fi nish setup.
3. Press AUX to fi nish setup.
3. While INTER is held, press HORN to
decrease volume.
PW-50 v3
PW-50 v3
Setting the volume of the external loudspeaker, "external volume"
1. Press and hold PTT .
2. While PTT is held, press WAIL to
increase volume.
External Volume Auto-Adjustment (VAA)
In addition to the manual adjustment, the equipment is capable of detecting the vehicle's
level of acoustic isolation and adjust the maximum external volume accordingly.
To perform this procedure, close all of the vehicle's doors and windows, and follow the
steps explained below.
To cancel the procedure, press PTT.
1. Press and hold PPT .
2. While PTT is held, press INTER .
Remain silent during the procedure.
Release both upon hearing a beep.
Enabling Hidden Siren Function
The equipment allows to silence the siren sounds, meaning that when this function has
been enabled and activated, the pressing of any of the siren buttons (SIREN, WAIL, HORN,
AUX SIREN) will not yield a response.
1. To switch between both states, press simultaneously WAIL ,
HORN, AUX , SIREN , and hold for 5 s.
Activating / Deactivating Hidden Siren
Once Hidden Siren has been enabled, it is possible to activate it to effectively silent all
sirens, and deactivate to return all sirens to normal function.
1. To activate Hidden Siren , press and
1. While INTER is held, press and hold
hold INTER .
PTT until keyboard's backlights blink.
1. To deactivate Hidden Siren , simultaneously press and hold
WAIL and HORN until keyboard's backlights blink.
3. While PTT is held, press HORN to
decrease volume.
1. Wait up to 30 s, the equipment will
beep 2 times when VAA has fi nalized.
1. If it beeps 1 time, Hidden Siren is enabled.
If it beeps 2 times, Hidden Siren is disabled.
2. Sirens will now be silenced.
2. Sirens will now sound.
7
7
Publicidad
Tabla de contenido
