Cleaning And Maintenance; Troubleshooting - Dometic VacuSealer VS 1000 Instrucciones De Uso

Cleaning and maintenance

8 Cleaning and maintenance
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.
➤ Occasionally clean the product with a damp cloth.
9

Troubleshooting

Operation Problem
230 Vw oper- The device is not
ation supplied with volt-
age.
The status display
flashes green and
orange.
The status display
does not light up,
the device does not
work.
16
Possible cause Remedy
The power plug Insert the power plug into
is not inserted the socket properly.
properly.
The device has Wait a few minutes until
overheated. the device has cooled
down and the flashing has
stopped.
Wait 20 – 30 seconds after
every procedure so that
the device can cool down.
The device is Contact an authorised cus-
defective. tomer service centre.
VacuSealer VS1000
EN