4.1.3.
Removing the filter baskets
Simply remove the filter baskets by pulling them out.
4.1.4.
Cleaning the filter baskets
Clean the baskets using a garden hose. You can also use a brush and soap to clean
them.
Be sure to remove all leaves, hair, sand, etc.
4.1.5.
Replacing the filtration baskets
Follow the previous steps in reverse.
4.2.
Storage
When the robot is out of the water, you can rinse it with clean water. Store it in a dry
and shady place at temperatures between 4 ° C and 46 ° C.
4.3.
Maintenance of the floating power cable
The cable can become twisted with time of use, much like the cable of a landline
telephone. To correct this, periodically pull the cable out in the sun. This should
remove the twists, thanks to the heat that the sun generates.
It is also important to check the cable periodically for any damage.
14