Window Slider Kit Installation - Black+Decker BPP05WTB Manual De Instrucciones

SET UP & USE

WINDOW SLIDER KIT INSTALLATION

Your window slider kit has been designed to fit most standard "Vertical" and
"Horizontal" window applications; however, it may be necessary for you to
improvise/modify some aspect of the installation procedures for certain types of
window. Minimum and maximum window openings:
MAXIMUM : 47.2" (120 cm)
NOTE: · Adjust the length of the window slider kit according to the window width or height,
and secure it with the provided locking screws.
NOTE: · If the window opening is less than 27.5" the minimum length of the window slider kit,
cut the one with a hole in it short to fit for the window opening. Never cut out the
hole in window slider kit.
Horizontal Window Vertical Window
DOUBLE-HUNG SASH/SLIDING CASEMENT
WINDOW INSTALLATION
1. Cut the foam seal (adhesive type) to the proper length and attach it to the
window sash.
2. Attach the window slider kit to the
window sash. Adjust the length of
the window slider kit according to
the width of window. Shorten the
adjustable window kit if the width
of window is less than 27.5".
3. Cut the foam seal (adhesive type)
to the proper length and attach it
on the top of the window.
4. Close the window securely
against the window slider kit.
5. Secure the window slider kit
to the window sash.
6. Cut the foam seal to an
appropriate length and seal the
open gap between the top window
frame and outer window frame.
MINIMUM : 27.5" (70 cm)
Window Slider Kit
Window slider kit can be secured
Locking by inserting the locking screw
screw
Cut on opposite
side of hole.
Foam
Seal
Window Sash
Window
Slider Kit
Window
Slider Kit
Foam
Seal
ENGLISH
Foam
Seal
27.5"– 47.2"
Window
Slider Kit
Window
Slider Kit
Foam
Seal
Page 11