Basic Features
White Balance
: Adjust the color temperature for a more
■
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-gain / g-gain / B-gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone
: Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.
Picture Options
O
MEnU
m → Picture → Picture Options →
EnTERE
✎
In PC mode, you can only make changes to the
Tone and size.
T V
Picture Options
Color Tone
Picture
Size
Digital Noise Filter
HDMI Black Level
Sound
Film Mode
Channel
Setup
Input
U Move E Enter R Return
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
or Warm2 is only activated when the picture
Warm1
mode is Movie.
✎
Settings can be adjusted and stored for each external
device connected to an input on the TV.
size
: Your cable box/satellite receiver
■
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Wide Zoom: Magnifies the picture size
more than 4:3.
✎
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide
✎
Adjusts the Position or Size by using
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
14
English
: Emphasize object
Color
: Normal
: 16:9
: Off
: Normal
: Off
POWER
P
P.SIZE
▲,▼ buttons.
▲,▼ button.
DUAL
SUBT.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎
nOTE
x
Depending on the input source, the picture size
options may vary.
x
The available items may differ depending on the
selected mode.
x
In PC Mode, only 16:9 and 4:3 modes can be
adjusted.
x
Settings can be adjusted and stored for each
external device connected to an input of the TV.
x
After selecting
screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
x
If you use the
screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
x
When Double (
Œ, À) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
Input source
TV, AV,
Component (480i, 480p)
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Digital noise Filter (Off / low / Medium / high /
■
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
S.MODE
hDMI Black level (normal / low)
■
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto)
■
sense and process film signals from all sources and
adjust the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
GUIDE
Picture size
16:9, Wide Zoom,
Zoom, 4:3
16:9, Wide Zoom,
Zoom, 4:3, screen
Fit
16:9, 4:3
P.MODE
: Selects the black
: Sets the TV to automatically
MEDIA.P
AD