Cleaning And Maintenance - VELFORM VIBRO Belt Manual De Instrucciones

TM
®
VELFORM VIBRO BELT
Congratulations on your purchase of the Velform® Vibro BeltTM,
the most advanced vibrating belt on the market today.
Muscle-vibration technology provides major benefits, so start
enjoying them now! The Velform® Vibro BeltTM belt will become
your closest ally and you can take it with you wherever you go.
Be sure to read all the instructions carefully before using the
Velform® Vibro BeltTM.
IMPORTANT
. Do not use the Velform® Vibro BeltTM if you are pregnant.
. Keep the Velform® Vibro BeltTM out of reach of children.
. Do not use the Velform® Vibro BeltTM if you suffer from thrombosis
or are receiving medical treatment.
. Do not use the Velform® Vibro BeltTM 30 minutes before or after meals.
. If you have suffered from a serious illness, consult your doctor
before using the Velform® Vibro BeltTM.
. Do not use the Velform® Vibro BeltTM near water or with wet hands.
. Store the Velform® Vibro BeltTM in the carry bag provided and
keep it away from sharp objects.
. Never place heavy objects on top of the Velform® Vibro BeltTM belt.
. Stop using the Velform® Vibro BeltTM immediately if you notice
any kind of discomfort.
. Use only the cables and adapter provided with the device.
. Unplug the device from the mains after each use.
. Do not try to disassemble, repair or modify the Velform® Vibro BeltTM.
. Do not use the Velform® Vibro BeltTM at high temperatures or
in very humid environments.
. The Velform® Vibro BeltTM is not a medical or therapeutic device.
CONTENTS
1 belt and control pad
1 adapter
1 carry bag
1 instruction booklet
1 diet booklet
1 measuring tape
PUTTING THE BELT ON
1. Separate the two rear parts of the fastening system.
2. Wrap the Velform® Vibro BeltTM belt around the part of your
body you want to work on and fasten the ends at the rear so the
belt fits snugly.
3. Plug the device into the mains.
USING THE CONTROL PAD
When the device is plugged into the mains, press the ON/OFF
button on the control pad. You will hear a beep and the red Power
light on the control pad will switch on to indicate that the belt is
ready for use.
You can now choose between two operating modes: Automatic
or Manual.
Automatic Mode
Automatic mode consists of a combination of vibration rhythms
specially designed to make each use of the Velform® Vibro BeltTM
a pleasurable experience.
1. Press the Mode button on the control pad once to activate
Automatic Mode. The red Auto light on the control pad will light
up to indicate that Automatic Mode has been activated. Automatic
Mode consists of a selection and combination of vibration rhythms
that provide all the benefits of a vibratory massage.
2. Adjust the intensity by pressing the "+" button to increase the
intensity, and the "-" button to lower it.
Manual Mode
Manual mode consists of one constant vibration rhythm specially
designed for easy selection of the right intensity for each moment
and need.
1. Press the Mode button twice to activate Manual Mode. The red
Manual light on the remote control will light up to indicate that
Manual Mode has been activated. All you have to do is press the
"+" button to increase the intensity or the "-" button to reduce it.
You can go from one mode to the other by pressing the Mode
button.
The Velform® Vibro BeltTM will automatically shut off after 30
minutes of use.
When you are finished, press the ON/OFF button and the Power
light will go out. You can now unplug the device from the mains.

CLEANING AND MAINTENANCE

Your Velform® Vibro BeltTM belt requires practically no cleaning
or maintenance. If you need to clean your Velform® Vibro BeltTM,
all you have to do is wipe it down with a soft damp cloth. Make
sure the device is completely unplugged before cleaning.
3